Expansion Module Information

Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets

Configuring the Cisco Unified IP Phone

Table 2-3	CAPF Settings

Field		Required?	Setting

Certificate Operation		Yes	No Pending Operation.

Authentication Mode		Yes	Leave this field unchanged.

Authentication String		—

Key Size (Bits)		Yes

Operation Completes By		Optional

Certificate Operation Status		—	<None>

Note Security Profile Contains Additional CAPF Settings. See the “Phone Security Profile CAPF Information” section on page 1-30.

Table 2-4describes fields found in the Expansion Module Information section on the Phone

Configuration page. Leave all fields unchanged.

Table 2-4	Expansion Module Information

Field		Required?	Setting

Module 1		—	<None>

Module 1 Load Name		—	Leave blank.

Module 2		—	<None>

Module 2 Load Name		—	Leave blank.

External Data Locations Information

Define the server locations for external data using the information in the following sections as a guide:

•External Data Location Settings for CTS Release 1.6 and Earlier—Table2-5

•External Data Location Settings for CTS Release 1.7 and Later—Table2-6

Note Observe the Following—The server designation can be either the IP address or the hostname of the Cisco TelePresence device that is associated with this phone.

If a server hostname is used, it must be resolvable by the Cisco Unified IP Phone 7970 Series DNS.

•The format for each required field is http://server hostname: or IP address: Followed by the 8080 port address, then a slash and one of the following, depending on the field:

–services.html

–getservicesmenu.jsp

–authenticate.html - For CTS release 1.6 systems with MIDlets and earlier (only allowable option)

–idle.html

Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System

2-8	OL-21851-01

Cisco Systems OL-21851-01 manual Expansion Module Information, External Data Locations Information

Field