Cisco Systems 7965G, 7945G manual See the Providing Power to the Phone section on

Chapter 3 Setting Up the Cisco Unified IP Phone

Installing the Cisco Unified IP Phone

Table 3-1	Installing the Cisco Unified IP Phone 7965G and 7945G (continued)
Task	Purpose	Related Topics
4.	Connect the power supply to the Cisco DC Adapter	See the “Providing Power to the Phone” section on page 2-3.
	port.
	Optional.
5.	Connect a straight-through Ethernet cable from the	See the “Network and Access Ports” section on page 3-2for
	switch to the 10/100/1000 SW port.	guidelines.
	Each Cisco Unified IP Phone ships with one Ethernet
	cable in the box.
	You can use either Category 3/5/5e/6 cabling for 10
	Mbps connections, but you must use Category 5/5e/6
	for 100 Mbps connections and Category 5e/6 for 1000
	Mbps connections.
6.	Connect a straight-through Ethernet cable from	See the “Network and Access Ports” section on page 3-2for
	another network device, such as a desktop computer,	guidelines.
	to the 10/100/1000 PC port.
	Optional. You can connect another network device
	later if you do not connect one now.
	You can use either Category 3/5/5e/6 cabling for 10
	Mbps connections, but you must use Category 5/5e/6
	for 100 Mbps connections and Category 5e/6 for 1000
	Mbps connections.

Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0

3-6 OL-15427-01