Cisco Systems 7945G, 7965G manual Adjusting the Placement of the Cisco Unified IP Phone

Page 9

Chapter 3 Setting Up the Cisco Unified IP Phone

Adjusting the Placement of the Cisco Unified IP Phone

Expansion Module 7915, or 7916 12-Button Line Expansion Module or 7916 24-Button Line Expansion Module for the Cisco Unified IP Phone Expansion

Module 7916.

In the Firmware Load Information section, there are two fields that specify the firmware load for Modules 1 and 2. You can leave these fields blank to use the default firmware load.

Note If you are running the SCCP protocol, you can configure a maximum of 42 lines on your phone. For example, if you configure two 24-line Cisco Unified IP Phone Expansion Modules, you will have a total of 56 lines (48 lines from the modules in addition to the 8 lines on the phone).

However, only the first 42 lines will be available for use.

In the Firmware Load Information section, there are two fields that specify the firmware load for Modules 1 and 2. You can leave these fields blank to use the default firmware load.

Step 7 Click the Save icon.

A message displays asking you to reset the phone for the changes to take effect. Click OK.

Step 8 Click Reset for the changes to take effect.

Note Refer users to their Cisco Unified Communications Manager User Options web pages, so they can configure speed dial buttons and program buttons to access phone services on the Cisco Unified IP Phone Expansion Module. See the “How Users Subscribe to Services and Configure Phone Features” section on page A-3for more details.

Related Topics

•Before You Begin, page 3-1

•Adjusting the Placement of the Cisco Unified IP Phone, page 3-9

•Configuring Startup Network Settings, page 3-13

Adjusting the Placement of the Cisco Unified IP Phone

The Cisco Unified IP Phone includes an adjustable footstand. When placing the phone on a desktop surface, you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60 degrees. You can also mount these phones to the wall by using the footstand or by using the optional locking wall mount kit.

Adjusting Cisco Unified IP Phone Footstand and Phone Height

You can adjust the footstand adjustment plate on the Cisco Unified IP Phone to the height that provides optimum viewing of the phone screen. See Figure 3-3for more information.

Procedure

Step 1 Push in the footstand adjustment button.

Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0

 

OL-15427-01

3-9

 

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Network Requirements Before You BeginNetwork and Access Ports Cisco Unified Communications Manager ConfigurationHandset SpeakerphoneHeadset Audio Quality Subjective to the User Purpose Related Topics Installing the Cisco Unified IP PhoneSee the Providing Power to the Phone section on 185045 Attaching a Cisco Unified IP Phone Expansion Module ProcedureAdjusting Cisco Unified IP Phone Footstand and Phone Height Adjusting the Placement of the Cisco Unified IP PhoneMounting the Phone to the Wall Securing the Phone with a Cable LockParts Used in Wall Mounting the Cisco Unified IP Phone Before You BeginVerifying the Phone Startup Process Configuring Security on the Cisco Unified IP Phone Configuring Startup Network SettingsRelated Topic
Related manuals
Manual 104 pages 33.29 Kb
Top Page Image Contents