SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes
New Features in 1.4.1
XML: AastraIPPhoneExecute Object
A new XML AastraIPPhoneExecute object has been implemented on the IP phones. This object provides the ability to execute commands on the phone using XML. Release 1.4.1 supports the following Execute object commands:
•Reset - This command waits until the phone is idle and then executes a reset.
•NoOp - This command has no affect on the IP phone. It is made up of a blank URI. You can use this feature when you need to press a key on the phone to access a feature, and it is not necessary to display anything.
Since the server forces phone firmware changes, the AastraIPPhoneExecute object was implemented to send the reset command to the phone.
AastraIPPhoneExecute Object Structure
The AastraIPPhoneExecute object describes the structure of the XML document that is used to send a command to the phone. It delivers multiple execution requests to the phone. The basic structure of the AastraIPPhoneExecute object is:
<AastraIPPhoneExecute>
<ExecuteItem URI ="the URL or URI to be executed"/>
<!
23 |