IP Phone Release Notes 1.4.1
New Features in 1.4.1
9112i/9133i Only
Addition of DisplayName1 & DisplayName2 (now also applies to 9112i/ 9133i)
The 9112i/9133i IP phones now support the use of displayName1 and displayName2. The value in these fields display on the idle screen of the IP phone. Previous IP phone releases supported these parameters on the 480i/480i CT only.
You can configure these parameters via the configuration files or the Aastra Web UI.
Configuring via the Configuration Files
You use the following parameters in the configuration files to configure displayName1 & displayName2.)
Parameter – | Aastra Web UI | Basic |
displayName1 | Configuration Files | aastra.cfg, <mac>.cfg |
Idle Display Name 1 |
|
|
(in Web UI) |
|
|
|
| |
Description | The name displayed on the idle screen rather than the screen name and | |
| phone number |
|
|
| |
Format | Alphanumeric characters | |
|
|
|
Default Value | Not Applicable |
|
|
|
|
Range | For 480i/480i CT: |
|
| Up to 21 characters (width of LCD) | |
| For 9112i/9133i: |
|
| Up to 16 characters (width of LCD) | |
|
| |
Example | displayName1: SIPphone1 | |
|
|
|
48 |