Viewing Device Information

Chapter 8 Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone

Step 1 Choosing Settings > Security Configuration > Trust List.

Step 2 To exit the Trust List screen, press the Exit softkey.

The Trust List screen contains these options:

•CAPF Server—IP address of the CAPF used by the phone. Also displays a certificate icon if a certificate is installed for this server.

•Communications Manager / TFPT Server—IP address of a Cisco Unified Communications Manager

and TFTP server used by the phone. Also displays a certificate icon if a certificate is installed for this server.

•SRST Router—IP address of the trusted SRST router that is available to the phone, if such a device has been configured in Cisco Unified Communications Manager Administration. Also displays a

certificate icon if a certificate is installed for this server.

You can access the Device Information screen on the Cisco Unified Wireless IP Phone 7925G,

7925G-EX, and 7926G and to view information about the current configuration:

•Cisco Unified Communications Manager servers

•Network settings

•WLAN information

•HTTP information

•Locale information

•Security settings

•QoS information

To view the Device Information screen, follow these steps:

Procedure

Step 1 Choose Settings menu> Device Information.

Step 2 Use the Navigation button to scroll to one of the categories in the Device Information screen and press Select.

The list of items under the category displays.

Table 8-2describes the categories and items that appear in this screen.

Step 3 To exit the Device Information screen, press the Back softkey.

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

8-4