Cisco Systems manual See the Providing Power, Cisco Unified IP Phones, 7906G and 7911G

Chapter 1 An Overview of the Cisco Unified IP Phone

Overview of Configuring and Installing Cisco Unified IP Phones

If you used auto-registration, you need to update the specific configuration information for the phone such as associating the phone with a user, changing the button table, or directory number.

Checklist for Installing the Cisco Unified IP Phones 7906G and 7911G

Table 1-5provides an overview and checklist of installation tasks for the

Cisco Unified IP Phone 7906G and 7911G. The list presents tasks in a suggested order to guide you through the phone installation process. Some tasks are optional, depending on your system and user needs. For detailed procedures and information, refer to the sources in the list.

Table 1-5 Checklist for Installing the Cisco Unified IP Phones 7906G and 7911G

Task		Purpose	For More Information
1.	Choose the power source for the	Determines how the phone	See the “Providing Power
	phone:	receives power	to the
	– Power over Ethernet (PoE)		Cisco Unified IP Phones
			7906G and 7911G”
	– External power supply
			section on page 2-4.
2.	Assemble the phone, adjust phone	Locates and installs the phone	See the “Installing the
	placement, and connect the network	in the network	Cisco Unified IP Phone”
	cable.		section on page 3-9.
3.	Monitor the phone startup process.	Verifies that phone is	See the “Verifying the
		configured properly	Phone Startup Process”
			section on page 3-16.

	Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager
OL-10008-01		1-23