Aastra Telecom 41-001507-00 Connecting to the Network and to Power, Power Adapter, Inline Power

Page 10

Installation and Setup

Connecting to the Network and to Power

Power Adapter

Use the power adapter (sold separately) with your phone and plug your phone into a power source.

Alert!

For power, use only the GlobTek Inc. LPS adapter model no. GT-41080-1848 (sold separately) to connect from the DC power port on the phone to a power source.

Inline Power

If your network provides 802.3af compliant inline power, the phone is powered through the network.

1.On the back of your phone, connect an Ethernet cable into the network port marked with .

2.Plug the other end of the Ethernet cable directly into the network jack on the wall.

Ethernet Cable	To Network

Network Jack

(if inline power provided)

7	41-001507-00 REV00 – 04.2014

Image 10

Contents Aastra Model 6867i SIP IP Phone Software License Agreement Content Requirements Phone FeaturesWelcome About This GuideAdditional Accessories Not Included Phone PartsIP Phone Keys Key PanelKey Description Following table describes the keys on the 6867i IP PhoneIP Phone Keys Direct Network Connection Installation and SetupDirect or Shared Network Connection Shared Network ConnectionPower Adapter Connecting to the Network and to PowerInline Power Connecting a Handset or Headset HandsetInstallation Desk InstallationWall Installation Direct Wall Mount InstallationInstallation and Setup Place the handset into your phone’s handset cradle Telco Wall Plate Installation To Telco Wall Plate Place the handset into your phone’s handset cradle Accessing Your Options via the Phone UI Accessing Your Options via the Aastra Web UIAt the prompt, enter your username and password and click OK Why is my display blank? Troubleshooting SolutionsWhy is my handset not working? Why does the telephone wobble?After Warranty Service Limited WarrantyWarranty Repair Services ExclusionsLimited Warranty Australia Only Repair NoticeLimited Warranty Australia Only Disclaimer