Getting started
Battery charging
After installing the battery, charge the headset by placing it on the headset charger as shown below. Before registration, the headset ON/OFF light flashes twice every five seconds whether the headset is charging or not. After registration, the headset ON/OFF light is on when the headset is charging.
Push
ON/OFF light
Insert
1. Insert the headset into | 2. Push the headset downward |
the charging cradle. | until the ON/OFF light on the |
| headset turns on. |
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT191545). To obtain a replacement battery, visit our website at
www.telephones.att.com or call 1 (800)
In Canada, dial 1 (866)