AT&T TL 7600 user manual Temporary ring tone silencing, Intercom calls and transfers

Page 26

Operation

Headset operation

Temporary ring tone silencing

Press MUTE/FLASH to temporarily silence the ring tone in the headset earpiece. This silences the ring tone without disconnecting the call. The next incoming call rings normally at the preset volume.

NOTE: If you have more than one headset registered to the headset base, both headsets receive the ring tone when there is an incoming call. Pressing MUTE/FLASH on one headset will only silence the ring tone of that particular headset.

Intercom calls and transfers

If you have registered your headset to an AT&T DECT cordless telephone, follow the instructions in your telephone user’s manual for intercom calls and transfers.

When the cordless handset prompts you to enter a handset number:

•If you have 1 registered handset, press # (pound key) on the cordless handset.

•If you have 2 registered handsets, press #1 for headset 1 and #2 for headset 2.

NOTE: You can only make intercom calls or transfers from an AT&T DECT cordless handset to the DECT cordless headset.

21

Image 26

Contents TL7600 Dect Accessory cordless headset Congratulations Parts checklist Table of contents User’s manualIndex Quick reference guide headset Headset lightsMUTE/FLASH Headset alert tones Quick reference guide headset charger Power cord groovePower jack Charging cradleInstallation preparation Avoid placing the headset charger too close toCharger installation Important InformationBattery installation Battery charging Registering the headset Registering the headset If your telephone base has no Handset Locator button Headset attachments Over the ear hook To attach the ear hook to the headsetTo adjust the headset to wear on the other ear To remove the ear hook from the headset Headset attachments To remove the headset from the headband Behind the neck band To wear the headset on your left ear To remove the neckband from the headset Headset operation Making a callAuto off Answering a call on the headsetEnding a call on the headset Temporary ring tone silencing Intercom calls and transfersCall waiting Volume control To adjust the listening volumeOptions while on calls Options while on calls To mute the call Multiple headset/handset useMute To end muteYou may need to deregister your headsets if Replacing a headsetIf your telephone base has no Handset Locator button Cannot get a dial tone TroubleshootingMy headset doesn’t work at all Cannot dial out Other party cannot hear my voice during a callMy cordless headset isn’t performing normally Batteries do not hold a chargeTroubleshooting Hear other calls while using my headset My calls cut in and out while I’m using my cordless headset ON/OFF light on the headset is off while chargingCannot register the headset Common cure for electronic equipment Important safety information Important safety information Important safety information Precautions for users of implanted cardiac pacemakers Pacemaker patientsTaking care of your headset MaintenanceCleaning your headset Avoid waterFCC Part 68 and Acta FCC Part 68 and Acta Industry Canada FCC Part FCC Part Limited warranty What does this limited warranty cover?How long is the limited warranty period? How do you get warranty service? Other limitations Operating range Technical specificationsDect 6.0 digital technology Extended range and clarityIndex