Battery installation & charging
Step 1
Plug the battery connector securely into the socket inside the handset battery compartment, matching the
Step 2
Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
CHARGE light
Step 3
Charge the handset by placing it face up in the telephone base or charger. The CHARGE light is on when charging.
IMPORTANT INFORMATION
1.Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com or call 1 (800)
222-3111. In Canada, dial 1 (866) 288-4268.
2.If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.