AT&T 9050 user manual Telephone Memory

TELEPHONE MEMORY

This cordless phone can store 10 telephone numbers that you can dial just by pressing mand a number button.

Storing Memory Numbers

1Make sure the handset is off.

2Press p(the PHONE light blinks).

3Press a number key (0 to 9) to select a memory location.

4Enter the number you want to store (up to 16 digits)

— OR —

Press Rto store the last number dialed.

5Press m. You will hear a confirmation tone.

Replacing Stored Memory Numbers

You can replace a stored number by storing a new number in its place.

Storing a Pause in a Memory Number

While storing a number in memory, press and hold down the number button that comes before the pause until you hear the second beep. This inserts a two-second pause after that digit. If you hold the button down longer, you will hear more beeps as additional pauses are stored.

For example, to store 9, PAUSE, 555–0123 in memory location 3: Press p, 3, then hold down 9until you hear the second beep. Then press 5550

123, e.

Dialing Memory Numbers

1Press P.

2Press m.

3Press the number button (0–9) for the memory location of the number you’re calling.

Memory Guard

The phone numbers you store in memory are protected from loss when you change the handset battery, or in the event of a power failure.

12

9050_book.1AT&T 12 8/12/98, 4:14 PM