Voice Terminal Bottom View With Kickstand

FCC Warning	Bar Code
label	label

Figure 2. 8510T Voice Terminal (Bottom View With Kickstand)

The various components which appear on the bottom of the 8510T voice terminal are shown in Figure 2 and listed and explained below.

Adjunct jack	Used for connecting an external speakerphone, a
	headset adaptor, or other adjunct equipment. The jack
	is labeled “ADJUNCT.”
	WARNING: Do not insert the handset cord into the
	“ADJUNCT” jack. It will cause equipment damage.
Handset jack	Used for connecting the handset cord to your voice
	terminal. The jack is labeled	.
Kickstand	Can be lifted from the deskstand or can be left level with
	the bottom of the voice terminal. Check which
	kickstand adjustment allows you the best viewing angle
	of the display.
Line jack	Used for connecting the line cord to your voice terminal.
	The jack is labeled “LINE.”
Routing channel	Thread the line cord (and adjunct cord, if applicable)
	through the routing channel.