AT&T HS-8270 Case of Difficulty, If the phone does not work at all, check these items first

Page 47

IN CASE OF DIFFICULTY

If you have difficulty operating this phone, try the suggestions below.

For Customer Service, visit our website at www.telephones.att.com or call

1 800 222–3111.Please retain your receipt as your proof of purchase.

If the phone does not work at all, check these items first:

•Make sure the power cord is plugged into the base and an electrical outlet not controlled by a wall switch.

•Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack.

•If the phone does not beep, or beeps four times when you press P, the battery pack might need recharging or replacement.

•If the battery does not charge after six hours, replace it with Replacement Battery 3500 (SKU# 90817).

•Make sure the battery pack is installed correctly.

If the above suggestions do not solve the problem, try re-initializing the handset and base (see “To re-initialize the handset and base” below).

If you have no dial tone:

Check all the previous suggestions. If you still do not hear a dial tone, disconnect the phone and try another phone in the same jack. If there is no dial tone on that phone either, the problem is probably in your wiring or local service.

If you hear a two-beep signal when you try to use the handset:

•The handset and base are not communicating properly. You might be out of range. Move closer to the base and try again.

•If moving closer to the base does not help, follow the directions below to re-initialize the handset and base.

To re-initialize the handset and base:

1Disconnect the power to the base.

2Remove the handset battery pack.

3Wait at least 15 seconds.

4Insert the handset battery pack.

5Connect the power to the base.

6Put the handset in the base to re-initialize.

46

Page 46 Page 48
Image 47
Page 46 Page 48
Contents MHz Cordless Answering Advanced American Telephones. All rights reserved Contents About Home and Local Area Codes About Caller ID with Call WaitingBefore You Install InstallationInstall the handset battery Table/Desk and Wall InstallationConnect the telephone line cord Softkeys Feature SetupMessage Window Display for Feature Setup Handset Ringer Telephone Feature SetupDial Mode Handset Ringer Off / Battery SaveCall List Options Caller ID Feature SetupProgram Home and Local Area Codes Caller ID with Call WaitingAnswering System Feature Setup Audible Message Alert Select Your AnnouncementRing Select / Toll Saver Change Priority Calling Code Change Remote Access CodePriority Call Signal Record Your Announcement from the Base Review Feature SettingsSet the Clock Delete an AnnouncementCaller Specific Outgoing Announcement Feature Setup Talking Caller ID Feature SetupAnnouncements Outgoing Local Review ADD Enter Number Done Menu Call ID DIR Directory MEM ANS SYS Delete Done Preview a Handset VolumeMake Answer, or End a Call FlashMute Telephone OperationRedial Temporary ToneRecord a Phone Conversation HoldIntercom Headset Jack Changing ChannelsAT the Base Speaker Base Ringer VolumeHandset Locator Page/IntercomStore a Number in Memory Telephone MEMORY/DIRECTORYReplace a Stored Number Store a Pause in a Memory NumberStore a Name with a Memory Number View Memory Numbers Store a Number and Name from Call HistoryEdit Memory Numbers Delete Memory NumbersDial a Memory Number from the Base Priority Ring NumbersDial a Memory Number from the Handset Announcement Play/Silent Audible IndicatorsAbout Mailboxes Record a Memo Answering CallsCall Screening/Intercept Announcement BypassFunction Button Listen To, Save & Delete MessagesCL ↔ AO Message Window DisplayFrom a Touch Tone Phone Call ScreeningConnect with the Answering System From the Cordless HandsetFunction Command Remote Access CommandsEnd remote access call Voice Help Menu Audible SignalsMemory Match Call WaitingIncoming Call History Display Dial Review Call HistoryDelete a Specific Call Record Caller ID OperationDelete Call Records from Call History Delete All Call Records Caller ID Display MessagesOperating Range Batteries Battery LifeCharge the Handset Battery Pack Batteries Replace the Handset Battery Pack To re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial toneIf the caller’s name or phone number is not displayed If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If you have difficulty hearing messages If speakerphone conversation sounds distortedIf messages are incomplete If your outgoing announcement isn’t clear If CL appears in the Message WindowAnswering System HS-8270 Remote CommandsRemote Command Press

HS-8270 specifications

The AT&T HS-8270 is a versatile and innovative hotspot device designed to provide users with reliable and high-speed mobile internet access. This portable device is particularly aimed at those who require consistent connectivity while on the go, making it ideal for remote workers, travelers, and families that need to stay connected to the digital world.

One of the main features of the HS-8270 is its ability to support 4G LTE connectivity, which ensures that users experience fast and responsive internet speeds. With LTE technology, users can enjoy streaming high-definition videos, online gaming, and quick downloads with ease. The HS-8270 is also backward compatible with 3G networks, allowing for continued service in areas where 4G coverage may be limited.

Another notable characteristic of the AT&T HS-8270 is its user-friendly design. The device is compact and lightweight, making it easy to carry in a bag or pocket. The intuitive interface includes an LCD screen that displays essential information such as battery life, signal strength, and data usage, enabling users to monitor their connection status effortlessly.

The HS-8270 can support multiple devices simultaneously, allowing users to connect smartphones, tablets, laptops, and other Wi-Fi enabled devices without any hassle. It can accommodate up to ten connections at once, making it an excellent solution for families or small groups on the move. The ability to create a secure Wi-Fi network also ensures that data remains protected against unauthorized access.

Powering the HS-8270 is a robust battery that offers extended usage time, enabling users to stay connected throughout the day without the need for frequent recharging. The device also incorporates features such as a power-saving mode, which helps to prolong battery life when not in active use.

Additionally, the AT&T HS-8270 comes with built-in advanced security features, including WPA/WPA2 encryption, to safeguard user data and protect against potential threats. The device is easy to set up and can be managed through a dedicated mobile app, which provides users with added control over their connection and data settings.

In summary, the AT&T HS-8270 combines speed, portability, and security, making it an ideal solution for anyone in need of dependable mobile internet access. Its range of features caters to various user needs, ensuring a seamless online experience whether at home, in the office, or on the go.
Top Page Image Contents