AT&T HS-8270 user manual If you hear noise or interference when using the phone

Page 48

IN CASE OF DIFFICULTY

If you hear noise or interference when using the phone:

•Make sure the base antenna is fully upright.

•You may be out of range. Move closer to the base.

•Household appliances plugged into the same circuit as the base can sometimes cause interference. Try moving the appliance or the base to another outlet.

•The layout of your home or office may be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

If the phone does not ring when you receive a call:

•Make sure the handset Ringer is on.

•Make sure the telephone line cord is connected firmly to the base and the telephone jack.

•Make sure the AC adapter is plugged firmly into an electrical outlet not controlled by a wall switch.

•You might be too far from the base; move closer.

•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

If your telephone misdials or you don’t hear the other person right away:

•It might take a few seconds for your handset to find a good connection to the phone line. While it is searching, the screen displays SEARCHING....

Do not start dialing until the appears and you hear the dial tone.

•If you have dial pulse (rotary) service, you’ll need to set the Dial Mode to PULSE. Follow the instructions under “Telephone Feature Setup” in the FEATURE SETUP section of this manual.

•If you have touch tone service and you hear clicks while you are dialing, you’ll need to set the Dial Mode to TONE. Follow the instructions under “Telephone Feature Setup” in the FEATURE SETUP section of this manual.

If the caller’s name or phone number is not displayed:

•Make sure you subscribe to a Caller ID service from your local telephone company.

•Make sure the handset Ringer is on.

•Make sure the battery is charged.

•Caller ID service might not work when the phone is connected to a Private Branch Exchange (PBX).

47

Page 47 Page 49
Image 48
Page 47 Page 49
Contents MHz Cordless Answering Advanced American Telephones. All rights reserved Contents About Caller ID with Call Waiting About Home and Local Area CodesInstallation Before You InstallTable/Desk and Wall Installation Install the handset batteryConnect the telephone line cord Feature Setup Message Window Display for Feature SetupSoftkeys Telephone Feature Setup Dial ModeHandset Ringer Off / Battery Save Handset RingerCaller ID Feature Setup Program Home and Local Area CodesCaller ID with Call Waiting Call List OptionsAnswering System Feature Setup Select Your Announcement Ring Select / Toll SaverAudible Message Alert Change Remote Access Code Priority Call SignalChange Priority Calling Code Review Feature Settings Record Your Announcement from the BaseDelete an Announcement Set the ClockTalking Caller ID Feature Setup Caller Specific Outgoing Announcement Feature SetupAnnouncements Outgoing Local Review ADD Enter Number Done Menu Call ID DIR Directory MEM ANS SYS Delete Done Handset Volume Make Answer, or End a CallFlash Preview aTelephone Operation RedialTemporary Tone MuteHold IntercomRecord a Phone Conversation Changing Channels Headset JackSpeaker Base Ringer Volume AT the BasePage/Intercom Handset LocatorTelephone MEMORY/DIRECTORY Store a Number in MemoryStore a Pause in a Memory Number Store a Name with a Memory NumberReplace a Stored Number Store a Number and Name from Call History View Memory NumbersDelete Memory Numbers Edit Memory NumbersPriority Ring Numbers Dial a Memory Number from the HandsetDial a Memory Number from the Base Audible Indicators About MailboxesAnnouncement Play/Silent Answering Calls Call Screening/InterceptAnnouncement Bypass Record a MemoListen To, Save & Delete Messages Function ButtonMessage Window Display CL ↔ AOCall Screening Connect with the Answering SystemFrom the Cordless Handset From a Touch Tone PhoneRemote Access Commands Function CommandEnd remote access call Audible Signals Voice Help MenuCall Waiting Incoming Call HistoryMemory Match Review Call History Display DialCaller ID Operation Delete Call Records from Call HistoryDelete a Specific Call Record Caller ID Display Messages Delete All Call RecordsOperating Range Battery Life Charge the Handset Battery PackBatteries Batteries Replace the Handset Battery Pack Case of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and baseIf you hear noise or interference when using the phone If the phone does not ring when you receive a callIf the caller’s name or phone number is not displayed If speakerphone conversation sounds distorted If messages are incompleteIf you have difficulty hearing messages If CL appears in the Message Window If your outgoing announcement isn’t clearRemote Commands Answering System HS-8270Remote Command Press

HS-8270 specifications

The AT&T HS-8270 is a versatile and innovative hotspot device designed to provide users with reliable and high-speed mobile internet access. This portable device is particularly aimed at those who require consistent connectivity while on the go, making it ideal for remote workers, travelers, and families that need to stay connected to the digital world.

One of the main features of the HS-8270 is its ability to support 4G LTE connectivity, which ensures that users experience fast and responsive internet speeds. With LTE technology, users can enjoy streaming high-definition videos, online gaming, and quick downloads with ease. The HS-8270 is also backward compatible with 3G networks, allowing for continued service in areas where 4G coverage may be limited.

Another notable characteristic of the AT&T HS-8270 is its user-friendly design. The device is compact and lightweight, making it easy to carry in a bag or pocket. The intuitive interface includes an LCD screen that displays essential information such as battery life, signal strength, and data usage, enabling users to monitor their connection status effortlessly.

The HS-8270 can support multiple devices simultaneously, allowing users to connect smartphones, tablets, laptops, and other Wi-Fi enabled devices without any hassle. It can accommodate up to ten connections at once, making it an excellent solution for families or small groups on the move. The ability to create a secure Wi-Fi network also ensures that data remains protected against unauthorized access.

Powering the HS-8270 is a robust battery that offers extended usage time, enabling users to stay connected throughout the day without the need for frequent recharging. The device also incorporates features such as a power-saving mode, which helps to prolong battery life when not in active use.

Additionally, the AT&T HS-8270 comes with built-in advanced security features, including WPA/WPA2 encryption, to safeguard user data and protect against potential threats. The device is easy to set up and can be managed through a dedicated mobile app, which provides users with added control over their connection and data settings.

In summary, the AT&T HS-8270 combines speed, portability, and security, making it an ideal solution for anyone in need of dependable mobile internet access. Its range of features caters to various user needs, ensuring a seamless online experience whether at home, in the office, or on the go.
Top Page Image Contents