M O R Y | AT&T 7610 specs

M E M O R Y

Light goes on when battery needs recharging.

Mute handset microphone.

Redial last number called.

Access telephone subscriber services.

Dial number stored in

M1 memory location.

Adjust handset volume.

This cordless phone can store 10 telephone numbers that you can dial just by pressing

pand one of the number buttons. Additionally, the phone offers a memory location accessed by pressing m.

Storing Speed-Dial Numbers

1Make sure the PHONE light is off.

2Press p.

3Enter the phone number (up to 16 digits).

4Press p.

5Press any number button from 0 to 9 for the memory location where the number is to be stored.

6A three-part tone confirms that the number was stored properly. If you hear a long buzzing tone, or nothing at all, press P, then follow the steps above to store the number again.

For example, to store 555–1234 in memory location 9:

Press p, 5, 5, 5,

1, 2, 3, 4, p, 9.

Storing a Number in M1

1Make sure the PHONE light is off.

2Press p.

3Enter the phone number (up to 16 digits).

4Press p.

5m.

NOTE: You may choose to store emergency numbers in the memory locations. The manufacturer assumes no responsibility for customer reliance upon this memory feature.

Storing a Pause

In a Memory Dial Number

When storing a number in memory, press and hold down the number button that comes before the pause, until you hear the second beep. This inserts a 1.5 second pause after that digit. If you hold the number button down longer, you will hear more beeps as additional pauses are stored.

NOTE: Each pause you store is counted as a digit. You can store up to 16 digits in each memory location.

For example, to store 9, PAUSE,

555-1234 in memory location 3:

Press p, 9, (hold the 9 for 2 seconds, until a second beep is heard). Then press 5, 5, 5, 1, 2, 3, 4, p, 3.

Dialing Speed-Dial Numbers

1Press P.

2Press p.

3Press the number button (0-9) you assigned to the number you’re calling.

For example, to dial the number stored in location 9, press

P, p, 9.

Dialing M1

1Press P.

2Press m.

Storing Numbers Just Dialed

Whenever you make a telephone call, you can store in memory the number you dialed. Press Rinstead of entering the telephone number when storing speed-dial numbers.

Replacing a Stored Number

You can replace a stored number by storing a new number in its place.

Memory Guard

The phone numbers you store in memory are protected from loss when you change the handset battery, or in the event of a power failure.

Directory Label

There is a directory label that you can use to keep a record of names or telephone numbers of the numbers stored in memory locations. You can place this label on the handset or the base.