AT&T EP590-3 user manual Belt clip & optional headset

Page 13

Belt clip & optional headset

Install belt clip as shown below if desired.

For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best result, use an AT&T 2.5 mm headset.

Snap belt clip into notches on side of handset. Rotate and pull to remove.

FLASHCANCEL

Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap).

Image 13

Contents GHz Expansion Handset EP590-3 NEED HELP? Information about caller ID with call waiting Stop Table of contentsNavKey SoftkeysIntercom Quick reference guide Main menuBefore you begin Parts checklistLow battery indicator Battery installation & charging1200AM Adding new handsets Adding new handsets To de-register a handset To replace a handsetTo de-register all handsets Belt clip & optional headset My telephone does not work at all Case of difficultyCharge light is off There is no dial tone Telephone does not ring when there is an incoming callCannot dial out Case of difficulty My caller ID features are not working properly Hear other calls when using the telephoneAnnouncement message is not clear Answering system does not record message Answering system does not respond to remote commandsMessages on the answering system are incomplete Messages on the system are very difficult to hearCommon cure for electronic equipment Important safety information Important safety information Especially about cordless telephones Pacemaker Patients Especially about telephone answering systems FCC Part 68 and Acta FCC Part 68 and Acta FCC Part FCC Part Limited warranty Limited warranty Limited warranty Limited warranty Please retain your receipt as your proof of purchase