AT&T 2255 user manual Handset Name, Disable Key Lock

Page 10

FEATURE SETUP

Key Lock

When this feature is on, the keypad cannot be used to dial calls. You can still answer calls, but when the call is ended, the keypad lock is reactivated. The key lock icon is displayed on the screen when this feature is activated. The default setting is OFF.

NOTE: To make an emergency call when the keypad is locked, press

Pthen 911. When the call is ended, the keypad lock is disabled.

1Press S.

2	Press <until the screen displays	>KEY	LOCK

		HANDSET NAME
3	Press S. The screen displays	KEY	LOCK

OFF

4Press <or >to display ON or OFF.

5Press Sto save the displayed setting.

Disable Key Lock

When the keypad is locked, press S, <, Sto turn off the lock.

Handset Name

You can customize the handset to display a name or word of your choice in place of the READY standby screen. The default setting is READY.

1Press S.

2	Press <until the screen displays	>HANDSET NAME
		>HANDSET NAME
		LANGUAGE
3	Press S. The screen displays	NAME
		NAME

4Use the chart on page 14 to enter a handset name.

5Press Sto save the displayed name.

8

Image 10

Contents With Caller ID/Call Waiting Part 1 Important Product InformationContents About Caller Identification Caller ID Before YOU BeginAbout the Base and the Charger About Call HistoryConnect the power cord InstallationTable/Desk Installation Install the handset batteryBelt Clip Spare Charger InstallationCharge the handset battery HeadsetWall Installation Feature Setup Menu Feature SetupHandset Volume Ring Volume Ring PatternAuto Answer Key ClickKey Lock Disable Key LockHandset Name Language Setting Clear Message WaitingSet Dial Mode Telephone Operation Forwarding a Call Temporary Tone DialingTransferring a Call Page/Handset LocatorConference Calling MuteTelephone Phone Book Storing a Number and Name in Phone BookEditing a Number/Name in Phone Book Dialing a Number in Phone BookDeleting a Number/Name in Phone Book Removing Call Records Caller ID OperationReviewing Call History Removing a Specific Call RecordDisplay Dial Storing a Call Record in Phone BookDialing Options Set the Clock Audible IndicatorsAnswering System Operation About MailboxesRecord Your Announcement Press Uuntil you hear Change announcementAnswering System Feature Setup Feature SummaryPlay Messages Adjust Playback VolumeListen To, Save & Delete Messages Delete MessagesRecord a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Remote Access CommandsVoice Menu Turn system off End remote access callRecord memo Turn system onCharge the Handset Battery Pack Battery LifeBatteries Replace the Handset Battery Pack If you have no dial tone Case of DifficultyIf the phone does not work at all, check these items first To re-initialize the handset and baseIf your telephone misdials If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If the caller’s name or phone number is not displayedIf callers are unable to leave messages in Mailbox 2 or If messages are incompleteIf you have difficulty hearing messages If CL appears in the Message WindowIf your outgoing announcement isn’t clear Advanced American Telephones. All rights reserved