AT&T 2440 user manual Belt Clip, Headset

Page 6

INSTALLATION

4Charge the handset battery.

•Place the handset in the base (or a remote charging stand, purchased separately).

•Charge the battery at least 12 hours. After the first charge, the battery will quick charge in only eight hours.

5Check for dial tone.

•After the batteries are charged, lift the handset and press P; you should hear a dial tone.

Belt Clip

Attach belt clip to the cordless handset (optional).

a) Slide down into	b) Push up and away
grooves to attach.	to remove.

Headset

You can use this telephone hands-free when you install a 2.5 mm headset (purchased separately).

Plug the headset into the jack located on the left side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

Image 6

Contents With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Choosing the Best Location Using More Than One HandsetBefore YOU Begin About Caller ID with Call WaitingInstallation Install the handset batteryBelt Clip HeadsetFeature Settings Telephone Feature Setup-HandsetHandset Softkeys Handset Features Telephone Feature Setup-Base Base FeaturesFlash Call Waiting Answer a CallMake a Call RedialMute VolumeTelephone Operation HoldHandset Icons Volume Flash/Call WaitingTelephone Operation Telephone Directory Store a Number and Name in MemoryView a Memory Number Delete a Memory Number Edit a Memory Number Dial a Memory NumberDelete a One-Touch Number Telephone MemoryStore a One-Touch Number Dial a One-Touch NumberHandset to Base Base to All HandsetsBase to One Handset Handset to HandsetBlind Transfer Handset to Base and All HandsetsTransfer Calls Announced TransferFour-Way Conferencing Dial Displayed Call Record Caller ID OperationView Calls Log Display Dial OptionsDelete Call Records Store Call Record in Telephone MemoryBattery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack Power Fail Operation Spare BatteryIf you have no dial tone Case of DifficultyIf the phone does not work at all, check these items first To re-initialize the handset and baseIf your telephone misdials If you hear noise or interference when using the phoneIf the phone does not ring when you receive a call If the caller’s name or phone number is not displayed