AT&T 1430 user manual Handset Ringer Style/Battery Save, Temporary Tone Dialing, Headset Jack

Page 11

1430_book_2ATT-mk1(DEC21) 5/16/02 5:47 PM Page 8

TELEPHONE OPERATION

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles,or turn the ringer off and extend the battery life.

1Make sure the handset is off.

2Press to enter programming mode.

3Press until the screen displays .

4Press . The screen displays the current setting.

5Press or to select , , , , or . You will hear a sample of each ring.

6Press to choose the displayed ringer setting.

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing . This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press . Buttons pressed after this send touch tone signals.

3After you hang up,the phone automatically returns to dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when you install any AT&T 2.5 mm headset, purchased separately.

Plug the headset into the jack located on the right side of the handset (under the small rubber flap).

Do not force the connection, but make sure the plug

fits securely.

8

Image 11

Contents GHz Cordless Telephone with Caller ID/Call Waiting Advanced AmericanTelephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginChoosing a Location for Your Phone Before You Install InstallationTable/Desk Installation Charge the handset battery Wall Installation Make a Call Handset VolumeAnswer a Call HoldPage/Handset Locator Telephone OperationHeadset Jack Handset Ringer Style/Battery SaveTemporary Tone Dialing Display Screen Messages Operating RangeStore a Number/Name in Memory Telephone MemoryEdit a Number/Name Stored in Memory Dial a Memory Number Delete a Number/Name Stored in MemoryStore a Number/Name in the Directory Telephone DirectoryEdit a Number/Name Stored in the Directory Dial a Number from the Directory Delete a Number/Name Stored in the DirectoryReview Call History Caller ID OperationAbout Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallStore a Call History Record in the Directory Turn off the Base NEW Call IndicatorBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone