AT&T 1430 user manual Wall Installation

Page 8

1430_book_2ATT-mk1(DEC21) 5/16/02 5:47 PM Page 5

INSTALLATION

Wall Installation

1Connect the telephone line cord.

2Connect the power cord.

3Mount the base on the wall.

Standard electrical outlet

a) Align holes on base with mounting studs on wall jack.

Modular telephone jack

b) Pull base down on mounting studs until it locks into place.

4 Follow Steps 3–5 in Table/Desk Installation.

5

Image 8

Contents GHz Cordless Telephone with Caller ID/Call Waiting Advanced AmericanTelephones. All rights reserved Contents About Caller Identification Caller ID Before YOU BeginChoosing a Location for Your Phone Installation Before You InstallTable/Desk Installation Charge the handset battery Wall Installation Handset Volume Answer a CallHold Make a CallTelephone Operation Page/Handset LocatorHeadset Jack Handset Ringer Style/Battery SaveTemporary Tone Dialing Operating Range Display Screen MessagesTelephone Memory Store a Number/Name in MemoryEdit a Number/Name Stored in Memory Delete a Number/Name Stored in Memory Dial a Memory NumberTelephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory Dial a Number from the DirectoryReview Call History Caller ID OperationAbout Call History Delete Records from Call History Dial a Displayed NumberDelete a Specific Call Delete All CallsTurn off the Base NEW Call Indicator Store a Call History Record in the DirectoryCharge the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone