91-5393-30-00_ATT1440_R1 2003.3.27 10:25 AM Page 30
IN CASE OF DIFFICULTY
If you have difficulty operating this phone,try the suggestions below. For Customer Service,visit our website at www.telephones.att.com or call
TELEPHONE OPERATION
PROBLEM
If the phone doesn’t work at all, check these items first:
SOLUTION
•Make sure the AC adapter is plugged into an outlet not controlled by a wall switch.
•Make sure the telephone line cord is plugged firmly into the base unit and the modular jack.
•Make sure the base antenna is fully upright.
•If the handset does not beep when you
press , the battery might need charging.
•Make sure the battery pack is installed correctly.
•If you have dial pulse (rotary) service on your phone line,make sure the dial mode is set to dial pulse (see INSTALLATION).
•Microwave appliances may cause interference with this phone.If you experience interference,move away from the microwave.
PROBLEMSOLUTION
If the above suggestions don’t solve the problem, try
handset and base:
1Disconnect the power to the base.
2Remove the handset battery pack.
3Wait a few minutes.
4Connect the power to the base.
5Insert the handset battery pack.
6Put the handset in the base to
30