AT&T 2230 user manual Spare Charger Installation, Belt Clip, Headset

Page 5

INSTALLATION

4Charge the handset battery.

Place the handset in the base (or the spare charger).

Charge the battery at least 12 hours. After the first charge, the battery will charge in eight hours.

5Check for dial tone.

After the batteries are charged, lift the handset and press P; you should hear a dial tone.

Spare Charger Installation

1 Connect the power cord attached to the spare charger to an electrical outlet not controlled by a wall switch.

2 Follow Steps 3–5 in “Base Installation.”

Belt Clip

Attach belt clip to the cordless handset (optional).

Headset

a)Slide down into grooves to attach.

b) Push up and away to remove.

You can use this telephone hands-free when you install any AT&T 2.5 mm headset (purchased separately).

Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

3

Image 5
Contents With Caller ID/Call Waiting Contents About the Base and the Charger Before YOU BeginAbout Caller Identification Caller ID About Call HistoryBase Installation InstallationHeadset Spare Charger InstallationBelt Clip Handset Volume Feature SetupFeature Setup Menu Ring Pattern Ring VolumeKey Click Auto AnswerHandset Name Disable Key LockKey Lock Clear Message Waiting Language SettingSet Dial Mode Telephone Operation Transferring a Call Temporary Tone DialingForwarding a Call Page/Handset LocatorMute Conference CallingStoring a Number and Name in Phone Book Telephone Phone BookDeleting a Number/Name in Phone Book Dialing a Number in Phone BookEditing a Number/Name in Phone Book Reviewing Call History Caller ID OperationRemoving Call Records Removing a Specific Call RecordDialing Options Storing a Call Record in Phone BookDisplay Dial Batteries Battery LifeCharge the Handset Battery Pack Replace the Handset Battery Pack If the phone does not work at all, check these items first Case of DifficultyIf you have no dial tone To re-initialize the handset and baseIf the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf your telephone misdials If the caller’s name or phone number is not displayedAdvanced American Telephones. All rights reserved