AT&T 1445/1145 user manual Case of difficulty, Not work at all

Page 29

91-5596-30-00_att1445manual_r0APR0104.qxd 1950/2/13 ⁄U⁄¨ 07:21 Page 27

Appendix

In case of difficulty

If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com, or call 1 800 222–3111.

Telephone does

• Make sure the battery pack is installed and charged correctly (see

not work at all

page 7).

 

• Make sure the AC adapter is plugged into an outlet not controlled by

 

a wall switch.

 

• Make sure the telephone line cord is plugged firmly into the base unit

 

and the modular jack.

 

• Make sure the base antenna is fully upright.

 

• If you have dial pulse telephone service, make sure the dial mode is

 

set to dial pulse (see page 11).

 

• If these suggestions do not work, unplug the base, remove and re-

 

insert the battery, then place the handset in the base to re-initialize.

 

 

Phone does not ring

•Make sure the ringer is on (see page 10).

•Make sure the telephone line cord and AC adapter are plugged in properly (see page 6).

•Make sure the base antenna is fully upright.

•Move the handset closer to the base.

•You might have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of them.

If you hear noise or interference during a call

•Make sure the base antenna is fully upright.

•You may be out of range. Move closer to the base.

•Press CHAN to select another channel. If noise is exceptionally loud, move closer to the base before changing channels.

•Appliances plugged into the same circuit as the base can cause interference. Try moving the appliance or base to another outlet.

•The layout of your home or office might be limiting the operating range. Try moving the base to another location, preferably on an upper floor.

•If the buttons don’t work, try placing the handset in the base for at least 15 seconds.

•Disconnect the base from the modular jack and plug in a corded tele- phone. If calls are still not clear, the problem is probably in your wiring or local service. Call your local telephone service company.

If you lose a call

• You were probably almost out of range. Move closer to the base

after changing

before changing channels. Before placing another call, set the hand-

channels

set in the base for at least 15 seconds.

27

Page 28 Page 30
Image 29
Page 28 Page 30
Contents GHz Cordless Telephone 1445/1145 See GHz Cordless Telephone 1445/1145 Table of contentsQuick reference guide Telephone Base Parts checklist Telephone operating range Before you beginAbout Caller Identification Telephone base installation Low battery indicator Battery installation & chargingWall mounting Belt clip & optional headset Install belt clip as shown below if desiredSet handset display date and time Customizing your telephoneChoose ringer sound Clear Message Waiting alert Choose dial modeChoose language Making and answering calls Making and answering callsSpeed dialing & directory dialing Last number redialOptions while on calls Handset locator Handset locatorDirectory Dialing To enter a Speed Dial number Speed dialingTo call a Speed Dial number To change or delete a Speed Dial numberEntering names into directory To browse through the directory Directory name searchTo search alphabetically To call a displayed numberTo move a listing To move, edit or delete a listingTo edit a listing To delete a listingCaller ID Operation To review your call log To review your call logTo return a call Other optionsExample To dial a call log entryDialing options To delete all call log entries To delete call log entriesTo delete a single call log entry To add entries to phone directory Screen display messages Display screen messages, lights and tonesAlert tones Indicator lightsNot work at all Case of difficultyTechnical specifications Index 91-5596-30-00att1445manualr0APR0104.qxd 1950/2/13 ⁄U⁄¨ 0721
Top Page Image Contents