AT&T ATCL2940, 210WH, 210 BLK user manual Language, Home area code

HOME AREA CODE

HAC-_ _ _

Telephone settings

Telephone settings

Language

You can select the language used for all screen displays.

1.Press MENU/SELECT repeatedly until the screen displays LANGUAGE.

2.Press CID or DIR to choose ENGLISH (default setting), ESPANOL or FRANCAIS, then press MENU/SELECT. The screen displays SET LANGUAGE?.

3.Press MENU/SELECT to confirm your setting and move to the next feature setup.

LANGUAGE

ENGLISH

NOTE: If you accidentally change the language to French or

Spanish, you can reset it back to English without going through the French or Spanish menus. When in idle mode, press MENU/SELECT once, then enter *3645474#.

Home area code

If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code. When you receive a call from within your home area code, the caller ID history only displays the seven digits of the telephone number, and when you dial from the call log, only seven digits are dialed.

If you use 10-digit (area code + telephone number) or 11-digit (1 + area code

+telephone number) formatting to dial within your area code, leave this setting blank.

1. Press MENU/SELECT repeatedly until the screen displays HOME AREA CODE.

2. Use the dial pad keys (0-9) to enter a three-digit home area code. To delete an entered digit, press

CID or DIR to move to the desired location, then press DELETE X.

3. Press MENU/SELECT to save your setting and move to the next menu setup.

13