AT&T E2520 user manual Base settings from handset, Base Settings Menu in Handset, Tone/Pulse

91-000020-021-000-E2520 Manual-ENG.qxd 2/13/1950 7:21 PM Page 16

HANDSET 1

REDIAL MENU MEM

CALLS LOG HANDSET SETTINGS SET TIME

CLOCK MODE

^ OK V

SET TIME CLOCK MODE REGISTER BASE SETTINGS

^ OK V

TONE/PULSE RINGER MELODY

^ OK V

TONE

PULSE

^ OK V

TONE

PULSE

^ OK V

Telephone Operation

Base settings from handset

Base Settings Menu in Handset

This menu allows the user to set Tone/Pulse and Ringer Melody on the base by handset.

Tone/Pulse

You can choose Tone or Pulse dialing for the base and all registered handsets. The factory default setting is TONE. Change this to PULSE only if you do not have touch-tone dialing service.

At the handset: Follow the steps at the left to use hand- sets to select between Tone or Pulse.

At the base: Press * button three times to enter pro- gramming mode. You will hear a happy tone. The IN USE and SPARE BATTERY lights will flash. Press 0 to select between Tone or Pulse. If you select Tone, the IN USE light will turn on. If you select Pulse, the IN USE light will turn off. Press # to confirm your selec- tion.

16