AT&T 959 Store Numbers and Names in the Directory, Store a Pause or Flash in a Directory Number

◗◗ OPERATIONDIRECTORY

Store Numbers and Names in the Directory

1Press d, then O. The screen displays ENTER NUMBER.

2Dial the telephone number you want to store (up to 24 digits)

— OR —

Press R to store the last number dialed.

NOTE: If the redial number is longer than 24 digits, you will hear an error tone if you are off hook while storing the number.

3Press O. The screen display includes

Enter Name.

4Use the “Keypad Characters” chart on page

23 to enter a name up to 15 characters long. Use CALL LIST +to backspace and CALL LIST -to advance or add a space. When you want to enter two characters in a row which share a keypad button (for example “M” and “O”), you must press CALL LIST -to move the cursor to the next position. There is no time limit for entering the name.

5Press O to store the name and number.

NOTE: To exit the directory at any time without saving changes, press C.

Store a Pause or Flash in a

Directory Number

Press CALL LIST -twice to store a pause in the dialing sequence (the screen displays P). Press F to store a press of the flash button (the screen displays F).

NOTE: To exit the directory at any time without saving changes, press C.