Tripp Lite H2562, H2550FL16, H2561, H2553, H2551, H2552, H2550EFL16

Networking Devices (switches, routers, etc.)

Networking hardware will typically drive the most significant changes to your existing power infrastructure. With requirements spanning buildings and remote wiring closets, existing facility-wide backup plans are often impractical or unable to address the requirements of mid-size and large switches. Focused UPS System additions with extended runtime battery configurations more efficiently add the high level of availability that VoIP users demand.

Tripp Lite maintains interactive sizing and configuration resources at www.tripplite.com/selector. We also welcome your contact with our technical staff via techsupport@tripplite.com or (773) 869-1234.

Basic sizing is as simple as…

1.Determining the power consumption of your equipment: Volts x Amps = VA.

2.Ensuring that the UPS System has enough power and outlets to accommodate your equipment.

Many larger routers and switches accommodate multiple power supplies. Once you have identified your power supply type and quantity, use the following details to find a specific UPS System solution for your needs:

1.Identify power supply configuration

a.Single power supply or two supplies operating in redundant mode

b.Dual (combined) mode

2.Determine UPS System protection scheme

a.Single UPS System for both power supplies

b.Single UPS System per power supply (higher availability)

3.Estimate desired runtime during power outage

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.