Motorola M-Series owner manual Channel Models Repeat to set chan- nels 3

Page 11

2 and 4 Channel Models

1. Turn Channel Selector knob to channel 1.

Channel Selector Knob

Fig. I

2.Hold Push-To-Talk button down while turning radio on. Fig. J

Radio announces current frequency set- ting for that channel. Example: “fre- quency one”

3.Press Push-To-Talk button to scroll through frequencies.

Radio announces each frequency as you scroll. Example: “two...three...”

4.Release Push-To-Talk when you have reached desired frequency.

5.Turn Channel Selector knob to channel 2 and repeat steps 3 and 4 above.

4 Channel Models: Repeat to set chan- nels 3 and 4.

6.Press Monitor button to select and save new frequency setting. Fig. L

Radio announces current code setting. Example: “code two nine”

7.Press Push-To-Talk button to scroll through codes.

Radio announces each code as you scroll. Example: “three zero...three one”

8.Release Push-To-Talk when you have reached desired code.

9.Press Monitor button to select and save new code setting.

Radio “beeps” to indicate it has exited programming and is ready for use.

FIG. I 2 or 4 Channel Model

Notes:

•To use this radio with other Spirit models, please see tables on pages 10-11.

•Code numbers with two digits (10-38) will be announced “one zero...three eight”.

•You can only scroll forward when select- ing frequency or code.

•When you are changing frequency or code, you can not send messages.

•The Code setting applies to all channels. You can not select a different code for each channel.

•For Radios With Scan: The radio will sound a warning tone if you accidentally switch to the “s” position while program- ming. See page 12 for more information.

Push-To-Talk

FIG. K

Monitor

FIG. L

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Series Please see pages 16 and 17 for complete information Here’s what the symbols meanCopyright Information Table of Contents FCC Licensing Information LicensingYour New Radio Contents of PackageSpirit M-Series Radio Getting StartedSlide belt clip up and off To Attach/Remove AntennaTo Attach/Remove Belt Clip Push the belt clip down until it clicks into placeBatteries Low Battery AlertTo Install/Remove Batteries Replace battery cover and lock latchesTurn the radio off To Charge Battery With Charger AdapterTo Charge Battery With 10 Hour Desktop Charger Allow 10 hours for the battery to fully chargeChannel Models To Change Frequency and Code SettingsProgramming Understanding Frequencies and CodesPress Push-To-Talk button to scroll through frequencies 4 Channel ModelsChannel Models Repeat to set chan- nels 3 Press Push-To-Talk button to scroll through codesOther Spirit Radio Frequencies Frequency TablesSpirit M-Series Radio Frequencies Watt Models Code TablesSeries Radios Other Spirit Radios Scan Optional Adjust the VolumeOperations Turn the Radio On/OffBuilt-In VOX Optional AccessoriesTo Use VOX Feature Exit VOX FeatureLimited Talk Range TroubleshootingSpirit Talk Range Radio CareInformation For Safe and Efficient Operation Safety InformationPotentially Explosive Atmospheres That extension cord is properly wired and in good conditionLimited Warranty Motorola Communication Products ONE Year Limited WarrantyNormal and customary wear and tear What this Warranty does not CoverRecycling of Nickel Cadmium Batteries RecyclingPage 6880905Z70
Top Page Image Contents