Motorola GM340 manual Utilities Deleting a Nuisance Channel, Using the Scan Button

UTILITIES

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls/ noise (a “nuisance” channel), you can temporarily remove it from the scan list by performing a Nuisance Channel Delete operation:

1.While the radio is on the Nuisance Chan- nel, press and hold the Nuisance Delete button until you hear the scan start alert tone.

2.Release the Nuisance Delete button.

Note: You cannot perform a Nuisance Channel Delete on a priority channel or if there is only one remaining channel in the scan list.

ADDING A DELETED NUISANCE CHANNEL BACK INTO THE SCAN LIST

Using the Scan Button

1.Press the Scan button to stop scanning. The scan stop alert tone will sound.

2.Press the Scan button again to re-start scanning. The scan start alert tone will sound, and the scan list will contain all programmed channels.

English 18