Motorola EX500 Adding a Deleted Nuisance Channel Back to the Scan List, Scan List Member Priority

SCAN

ADDING A DELETED NUISANCE CHANNEL BACK TO THE SCAN LIST

1Press the Scan button (see page 17) to stop the scan operation.

2Press the Scan button again to re-start the scan operation.

SCAN CHANNEL DISCOVERY ALERT

Sometimes you need to know which channel the radio has switched to during a scan operation. The Scan Channel Discovery Alert gives you this information.

After you have stopped a scan operation, this feature gives you audio feedback when you select the last channel that was switched to by the scan operation.

To do this:

1Stop the scan operation.

2Turn the Channel Selector knob (see page 15) to change the channels.

24

3When you reach the last channel the scan operation switched to, the radio sounds an alert tone.

SCAN LIST MEMBER PRIORITY

A channel in your scan list may be prioritized (check with your dealer for details). In such a case, the radio will check that prioritized channel more frequently than the other non- prioritized channels.

Assuming a scan list with 6 channels, if all your channels are non-prioritized, the normal scan operation would check for activity in the following sequence:

				Ch.1
		.	6	C
	h			.
					2
				h
C
.						h	C
h
5
		C		3	.
				4.hC

English