Motorola EX500 manual Adjusting the RADIO’S Volume Sending a Call, Selecting a Radio Channel

ADJUSTING THE RADIO’S VOLUME SENDING A CALL

1Press and hold the Volume Set button (see page 17); you will hear a continuous tone.

2Turn the On/Off/Volume knob (see page 16) and adjust the volume level.

3Release the Volume Set button (see page 17).

1Turn your radio on.

2Use the Channel Selector knob (see page 15) to select to the desired channel.

3Press the PTT button (see page 15), and speak clearly with your mouth about 2.5 to 5 cm (one to two inches) away from the micro- phone.

4Release the PTT button (see page 15) when you finish speaking.

GETTING STARTED

SELECTING A RADIO CHANNEL

Your radio offers sixteen (16) channels for easy access to required conventional channels. Some channels on your radio may not be programmed. Check with your dealer for more information.

To select a channel:

Turn the Channel Selector knob (see page 15) clockwise or counter-clockwise until you reach the desired channel.

RECEIVING A CALL

1Turn your radio on.

2Adjust the radio’s volume.

3Switch to the desired channel.

4If at any time a call comes through, you will hear the call at the volume level you have set.

17

English