Motorola CLP1060 manual Battery and Charger Features, Battery Features, About the Li-Ion Battery

Page 20

BATTERY AND CHARGER FEATURES

BATTERY AND CHARGER FEATURES

BATTERY FEATURES

The CLP Series radio provides Lithium-Ion batteries that come in different capacities that define the battery life.

About the Li-Ion Battery

The CLP Series radio comes equipped with a rechargeable Li-Ion battery. This battery should be charged before initial use to ensure optimum capacity and performance.

Battery life is determined by several factors. Among the more critical are the regular overcharge of batteries and the average depth of discharge with each cycle. Typically, the greater the overcharge and the deeper the average discharge, the fewer cycles a battery can last. For example, a battery which is overcharged and discharged 100% several times a day, lasts fewer cycles than a battery that receives less of an overcharge and is discharged to 50% per day. Further, a battery which receives minimal overcharging and averages only 25% discharge, lasts even longer.

Motorola batteries are designed specifically to be used with a Motorola charger and vice versa. Charging in non-Motorola equipment may lead to battery damage and void the battery warranty. The battery should be at about 77 °F (25 °C) (room temperature), whenever possible. Charging a cold battery (below 50 °F [10 °C]) may result in leakage of electrolyte and ultimately in failure of the battery. Charging a hot battery (above 95 °F [35 °C]) results in reduced discharge capacity, affecting the performance of the radio. Motorola rapid-rate battery chargers contain a temperature-sensing circuit to ensure that batteries are charged within the temperature limits stated above.

Battery Life

Based on 5% transmit, 5% receive, 90% standby (standard duty cycle):

Estimated Battery Life

Standard

Battery Type

Charging

Standard Li-Ion

High Capacity

Solution

Battery

Li-Ion Battery

 

 

 

 

CLP1010,

9 hours

14 hours

CLP1040

 

 

CLP1060

 

 

(Bluetooth Always

8 hours

12 hours

ON Mode)

 

 

12

Image 20
Contents CLP SeriesTwo-Way RadioTM Document Copyrights DisclaimerFCC Licensing Information Battery and Charger FeaturesComputer Software Copyrights Batteries and Chargers Safety Information Advanced Radio ConfigurationAccessories Programming The Radio Through CPSComputer Software Copyrights Radio Frequency RF Exposure Safety Standards Product Safety and RF Exposure ComplianceFCC Licensing Information FCC Licensing Information Introduction Radio Overview Getting Started Install the Battery Connecting a Wired Audio Accessory OverviewErase Bluetooth Headset History and Add Bluetooth Headset Add Bluetooth Headset Initial PairingReconnect to Last Connected Bluetooth Headset Turning the Radio On and Off Adjusting the VolumeInstalling and Removing the Swivel Belt Clip Holster Transmitting and Receiving Talk RangeOperation with Menu Settings HOW to StepDefault Channel Settings for CPS Selecting a ChannelMonitoring a Channel ScanningSending Call Tone enabled through CPS Mute FeatureDynamic Talkaround Scan Talk Permit ToneAbout the Li-Ion Battery Battery and Charger FeaturesBattery Features Battery Recycling and Disposal Removing the Lithium-Ion Li-Ion Battery Power Supply, Adapter and Drop-in Tray ChargerCharging a Standalone Battery Estimated Charging TimeBattery and Charger Features Charging Status LEDs Charging the Bluetooth Headset Checking Battery Status LEDBatteries Chargers Safety Information Operational Safety Guidelines Programming the Radio Through the CPS Radio Programming OverviewDownloading the Customer Programming Software CPS Programming the RadioFactory Default Settings CLP1040 1W UHF 4 CH Radios Default Settings BrusThrough the CPS Cloning Instructions Cloning Radio SettingsRadio Cloning Radio Cloning What to do if cloning fails Cloning the Radio through a Multi-Unit Charger Advanced Radio Configuration Entering Advanced Radio Configuration ModeTroubleshooting Symptom Try thisCan either reduce obstructions or increase power Section on page 15 and Charger LED Indicator Section on Cannot activate VOX VOX feature might be OFF USE and Care Radio Frequency and Code Charts CLP UHF FrequenciesCLP UHF Frequencies CTCSS/DPL Interference Eliminator Codes CTCSS/DPL Interference Eliminator Codes cont’d Products and Accessories Motorola Limited Warranty for the United States and CanadaWhat Does this Warranty Cover? Exclusions What WE will do to Correct Warranty Problems HOW to Obtain Warranty Service or Other INFORMATION?Software WHO is COVERED?Software Copyright Notice Retain Your Original Proof of PurchasePatent Notice Export LAW AssurancesAccessories Audio AccessoriesCarry Accessories BatteriesChargers Programming CablesAccessories Page 68012000044

CLP1060 specifications

The Motorola CLP1060 is a compact and innovative two-way radio designed specifically for business communication. Ideal for retail, hospitality, and event management, this device combines advanced technology with ease of use, making it a favorite among professionals who require reliable and instant communication.

One of the standout features of the CLP1060 is its sleek and lightweight design. Weighing in at just 3.5 ounces, it's one of the most portable radios in the market. The sleek form factor allows users to clip it onto their clothing or carry it easily without the bulk associated with traditional walkie-talkies. Its small size does not compromise performance; in fact, it includes a powerful audio system that ensures clear communication even in noisy environments.

The radio operates on the license-free PMR446 band, which makes it accessible for businesses without the need for costly licensing. This feature is particularly valuable for small businesses looking to enhance communication without incurring additional expenses. With a range of up to 200,000 square feet in optimal conditions, users can stay connected across large areas, making it suitable for expansive retail spaces or outdoor events.

Another integral characteristic is the push-to-talk (PTT) functionality, which allows for instant communication with the press of a button. This feature is complemented by a speaker microphone that provides hands-free operation, allowing employees to assist customers while staying connected. The CLP1060 also utilizes a robust battery that provides up to 12 hours of operation on a single charge, which is essential for businesses that operate long hours.

The Motorola CLP1060 incorporates advanced technologies such as integrated noise reduction and clarity-enhancing audio capabilities. This ensures users can hear and be heard, even in bustling environments, making misunderstandings less likely. Additionally, the device comes with customizable features and programmable buttons, enabling users to tailor the radio to meet their specific communication needs.

In terms of durability, the CLP1060 is designed to withstand the rigors of everyday use. It adheres to military specification 810 C, D, E, and F standards for protection against dust and moisture, making it suitable for various professional settings.

In conclusion, the Motorola CLP1060 is a feature-rich communication tool that combines portability, functionality, and durability. Its design and innovative features cater specifically to professionals in dynamic environments who require effective and efficient communication solutions.