Jabra 6470 Installation and Setup, Attach/adjust a headset wearing-style, Apply power to the base

US

Installation and Setup

Step 1: Attach/adjust a headset wearing-style

A setup wizard automatically launches on the touchscreen.

Included in the standard package are the headband and ear hook wearing styles. The headset is delivered already attached to the ear hook, shown below. Slide the attachment up or down until the headset fits most comfortably to your ear.

You can instead attach the headset to the supplied headband, shown below. To do this, first detach the ear hook and then press the headset into the headband’s attachment socket. Once assembled, you can rotate the headset for use on either ear.

English

Italian

Norwegian

SETUP		DESK PHONE
Congratulations on your	Connect to a desk
new jabra GO 6400!		phone
This guide will help you
assemble and configure
your headset solution.
	Yes	No

3 Sec.

For further details on attaching/detaching wearing styles, refer to the procedures in the full user manual on the CD-ROM supplied with your headset.

Step 2: Apply power to the base

Connect the mains power adapter to the base’s power

port (marked with ), then plug it into a mains power socket.

Step 3: Connect the base to your desk phone

Let the wizard guide you through the task of connecting your desk phone to the base.

The way in which you connect the two devices will vary according to whether the phone has a headset port and whether it has an electronic hook-switch or remote handset lifter (such as the GN1000).

You need to determine this yourself. For example, you might already have an electronic hook-switch (EHS) installed or you might have ordered a remote handset lifter (such as the GN1000) together with your headset package. You can use the wizard to configure your EHS connection (if any).

Note: Connection to a phone which includes an electronic hook-switch requires a model-specific adapter from Jabra. See the user manual for more.