US
Step 4: Configure the base for your desk phone
Once the base has established a connection to the desk phone, the optimal clear
The wizard will prompt you to call your local Jabra setup server — see the cover of this quick start guide for a list of numbers. This enables the Jabra GO base to test its clear
Note: If the base is unable to contact the server, you can choose to configure the desk phone manually. See the user manual for more.
To set the clear
1.The touchscreen wizard prompts you to call the Jabra setup server. Follow the
There is no clear
Equally, the base will determine the optimal microphone level automatically.
Step 5: Connect the base to your softphone (PC)
To use Jabra GO with a softphone, you must first connect the Jabra GO base to your PC via a USB cable. The softphone part of the setup wizard will prompt you to do this.
1.Connect the small connector (mini USB) of the
supplied USB cable to the port marked on the Jabra GO base.
2.Connect the other end of the USB cable to any free USB port on your computer.
Step 6: Enable your softphone interface
1.Insert the
The softphone part of the setup wizard will prompt you to do this.
The installation includes the supported softphone drivers necessary to enable the softphone interface.
If you have any questions as you work through the setup wizard, or if you would like to learn more on how to use the many advanced features of your headset solution, please refer to the full user manual. This is included on the
2.
The Jabra Device Service window opens. This shows the list of softphone drivers installed on your PC. Use the online help available in this window to learn more.
3.Select the softphone you want to use (target softphone) from those available in the Select softphone for outgoing calls