English
10Certification and safety approvals
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Jabra (GN Netcom) will void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
The user must place the base 8" (20cm) or more from any personnel in order to comply with FCC RF exposure requirements.
Industry Canada
Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The term "IC:" before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
CE
This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC).
Hereby, GN Netcom, declares that this product is in compliance with the essential |
| |
requirements and other relevant provisions of Directive 1999/5/EC. | English | |
For further information please consult http://www.gnnetcom.com | ||
| ||
Please note that this product uses radio frequency bands not harmonised within EU. |
| |
Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, |
| |
France, Germany, Greece, Ireland. Italy, Luxembourg,The Netherlands, Portugal, Spain, |
| |
Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. |
| |
Bluetooth |
| |
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use |
| |
of such marks by Jabra is under license. Other trademarks and trade names are those of |
| |
their respective owners. |
|
11Glossary
1Bluetooth is a radio technology developed to connect devices, such as mobile phones and headsets, without wires or cords over a short distance of up to 10 metres (approx 30 feet). More information is available at www.bluetooth.com
2Bluetooth profiles are protocols through which Bluetooth devices communicate with other devices. Your phone needs to support either the handsfree or headset profile to function with the Jabra BT110.
3Pairing creates a unique and encrypted communication link between two Bluetooth enabled devices and allows them to communicate with each other. Bluetooth devices will not work if the devices have not been paired with each other.
4Passkey or PIN is a code that needs to be entered on the phone in order to pair the mobile phone with the Jabra BT110. When you have already paired your mobile phone with the headset, the phone and the Jabra BT110 will recognize each other and the phone will bypass the discovery and authentication process and automatically accept the transmission.
5Standby mode is when the Jabra BT110 is used with the Jabra A210 and is passively waiting for a call. When you “end” the call on your mobile phone, the headset will go into standby mode. The yellow LED will indicate standby mode by flashing every 3 seconds.
10 | 11 |