Cobra Digital BT 200 Push to Talk PTT, Green Phone Button, Red Phone Button, Home Button

Page 7

Common BT 200 Functions

Operating Your Handset

Push to Talk (PTT)

This button serves two functions:

■To activate the handset microphone during a call when VOX is Off. This is similar to the action of such a button on a Cobra VHF or a CB radio.

■To activate the handset microphone for a PA announcement, the unit must be in Standby and be connected to the stereo’s AUX input with the stereo in AUX mode.

To Activate the Handset Microphone During a Call:

1.After placing or accepting a call, press the PTT button and talk into the handset microphone.

To Make a PA Announcement:

1.When the unit is in Standby mode, press the PTT button and talk into the microphone.

NOTE

Before a PA announcement can be made:

■The PA function must be turned ON from the settings menu.

■The BT 200 must be connected to the stereo system AUX input.

■The stereo must be in AUX mode with the stereo’s volume adjusted.

■An optional installation cable is necessary to use the PA feature.

Green Phone Button

This button acts just like the green phone button on a cell phone. Pressing the button answers an incoming call and initiates dialing an outbound call after the number has been entered or selected.

In Standby mode, this button is a shortcut to the Call Log where a number can be selected to call.

Red Phone Button

This button acts just like the red phone button on a cell phone. Pressing the button ends an active call.

In modes other than an active call, it backs up to the Standby mode.

8 English

Common BT 200 Functions

Operating Your Handset

Home Button

Pressing this button enables you to return the handset to Standby mode from any other mode.

Voice Dialing / Last Number Redial

This button serves two functions:

■To enable voice dialing.

■To redial the last number dialed from the handset.

Voice Dialing

You can activate your cell phone's voice dialing feature from Standby mode.

To Voice Dial A Number:

1.Press and release the Voice Dialing / Last Number Redial button.

2.Say the name or phone number command following the audio prompt.

The display screen will show the progress of dialing and connecting the call.

NOTE

Your cell phone must have voice dialing enabled and voice commands recorded to use this feature with the BT 200.

To Redial The Last Number Dialed:

1.Press and hold the Voice Dialing / Last Number Redial button for two seconds. The display screen will show the progress of dialing and connecting the call.

Function Buttons

The Function buttons provide different utilities to different modes of handset operation. In any mode, the active functions are shown directly above the buttons on the display screen as shown in this Standby display.

Functions

In this example, pressing the second button from the

 

left will display the Menu.

PAIRED TO

 

XXX

Function Names

VOL MENU LOG CONT

 

Function Buttons

Nothing Comes Close to a Cobra® 9

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Customer Assistance For Assistance in the U.S.A Our Thanks to You Customer AssistanceFor Assistance Outside the U.S.A Trademark Acknowledgement Handset Controls IndicatorsBacklit LCD Screen Product Features and Trademarks Product FeaturesTable of Contents Included in this Package Important Safety InformationGeneral Precautions Important Safety InformationGetting Started InstallationInstalling the Hanger Bracket InstallationBack Light/Lock Common BT 200 FunctionsCommon BT 200 Functions Home Button Push to Talk PTTGreen Phone Button Red Phone ButtonIncoming Call OperationCall Waiting StandbyBluetooth Phone Setup and Switching Menu OperationProduct FeaturesDial By Number PA Output Bluetooth Phone Setup Settings CustomizingProduct FeaturthesBTPhonebook Entries Customizing the BTPA Output Display SettingsVolume Volume DisplayKey Tones Ring TonesFor Products Purchased Outside The U.S.A WarrantyMaintenance Product Service For Products Purchased In The U.S.ACobra line of quality products includes
Top Page Image Contents