Cobra Digital BT 200 owner manual Bluetooth Phone Setup and Switching

Operation

Operating Your Handset

Call Log

The most recent incoming and outgoing calls are recorded in the handset Call Log. These can be used to select and dial a number.

Operation

Operating Your Handset

Bluetooth Phone Setup and Switching

The Cobra Bluetooth handset can be paired with only one device at a time. However, it can store pairing information on up to eight different devices.

To access a number in the Call Log, press the Menu Function button in Standby mode, then select the Call Log mode to arrive at the screen shown.

Setup

To Begin Phone Setup or To Switch To Pair With a Different Device:

Call Log

Select and Dial a Number

1 BILL ANDERSON

21 555 588 2300

3JANE DOE

41 555 600 4300

5MARY WILLIAMS

61 555 250 4343

PG PG VIEW

To Select and Dial a Number:

1.Use the Page Up and Page Down buttons to shift up and down the list of entries.

2.Use the Up and Down Arrow buttons to scroll the pointer at the left of the screen to the desired entry.

3.Press the Green Phone button to call the number.

NEW

DELETE

DISABLE

SWITCH

New

1.Press the Menu button in Standby mode, then select the Bluetooth Phone Setup mode to arrive at the screen shown.

2.At this screen, use the Up and Down Arrow buttons

to move the pointer to the desired function. Then press the Enter button to select the function and advance to its screen.

New can be used to add a device to those already paired or to pair a device if you did not do so at the initial Power On of the BT 200.

NOTE While in Call Log mode, you can see details of the selected entry by pressing the View Function button or Enter button.

Dial Number

To enter a number you want to dial, press the Menu Function button in Standby mode, then select the Dial By Number mode to arrive at the screen shown.

To Enter a Number to be Dialed:

Dialing a Number

1.Press and release the Function button under the first digit

ENTER NUMBER	of the phone number until the correct number appears
	above the flashing cursor.
1 2 3 4 5 6 7 8 9 0+ *#	2. Wait for the cursor to shift to the right or press the Enter
	button to shift the cursor.

Add a New Cell Phone

READY FOR PAIRING

TO YOUR PHONE

PASSWORD IS 0000

2:59 MNTS REMAINING

Delete

To Add a New Cell Phone:

1.Select New on the Phone Setup screen to advance to the screen shown.

2.Follow the cell phone’s instructions to search for available pairing with another Bluetooth device. This can often be found in the Tools or Settings menu of your mobile phone.

3.Wait for the pairing process to complete.

You will then see a confirmation of successful pairing or a notice to try again if pairing did not occur.

The newly paired cell phone will become the active one that is used for calls until you Switch to another.

3. Enter the second digit of the phone number as in step 1.

4.Repeat steps 1 and 2 until the complete number has been entered.

5.Press the Green Phone button to call the number.

NOTE The number will appear on the screen without dashes or other separators.

12 English

Delete is used to remove the pairing information for a device from the handset memory.

Delete a Cell Phone			To Delete a Cell Phone:
			1.	Select Delete on the Phone Setup screen to advance
	BILL	ANDERSON		to the screen shown.
	JANE DOE		2. Use the Page Up and Page Down buttons to shift up
	WIFES	PHONE
PG	PG	DEL	EXIT	and down the list of entries three items at a time.
			3.	Use the Up and Down Arrow buttons to scroll the
				pointer at the left to the screen to the desired entry.
			4.	Press the Delete Function button to remove the
				device from the list.

Nothing Comes Close to a Cobra® 13