USER’S MANUAL — Please read before using this equipment.
Pairing with a phone
Before using the hands free, you must pair it with the mobile phone first. Once the hands free and the phone have paired they store each other’s ID. Therefore, they can connect to each other automatically. You can check, delete or rename the paired device in the devices list of the mobile phone.
1.Place the Bluetooth hands free and your Bluetooth mobile phone within a distance of 1 meter.
2.Switch on your Bluetooth mobile phone and enable the Bluetooth feature.
*If the phone has 'Profile' options, you are recommended to select 'Hands free Profile' rather than ‘Headset Profile.’
3.Turn on the hands free. The LED indicator will flash blue every 5 seconds to indicate it is in idle mode.
4.On your Bluetooth mobile phone, when searching for device, 'HF009' will appear in the device list.
5.Select device 'HF009' and enter fixed pass key '8888'. Pairing completed. The LED indicator turns blue steadily indicates the hands free is connected to the phone with Hands free Profile
.6. Make sure the paired mobile has returned to main menu.
7.The volume is automatically set to middle level. For best performance, press '+' or
Check if the mobile displays any messages or icons which indicate the connecting status. After the pairing is completed, some phones automatically connect to hands free immediately. Some phones keep waiting for manual connection. In this case, press Multifunction Key once, BTHF009D Plus will connect to the phone. Or you can select 'HF009' from the "Paired Device' of the phone. The phone will connect to the hands free. Please refer to your phone's user manual.
You should now be able to make wireless communication with the hands free. Keep the distance between the hands free and the mobile within 10 meters and free from obstacles. You can dial and receive calls by the phone, or activate the voice dialing, redial the last number and receive calls through the hands free.
7© 2007 Wagan Corporation. All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
Bluetooth Wireless Handsfree Car Kit
By Wagan Tech
*‘Hands free Profile’ supports ‘Caller ID display’, ‘Voice dial’, ‘Redial the last number’, ‘Call waiting’ and ‘Call transfer’ functions. If the mobile phone only supports ‘Headset Profile’, those functions are not available.
Connect / Reconnect to your phone
After the hands free is turned on, it is in idle mode. It is waiting to be paired or connected to your Bluetooth mobile phone. The LED indicator flashes blue every 5 seconds indicating this mode. When the hands free and the cell phone are disconnected, the hands free will return back to idle mode.
To connect with phone
EITHER
To connect with paired phone or reconnect with previously connected phone, click Multifunction Key once. The hands free will search and connect to the nearest phone automatically. (The LED indicator flashes blue every second indicating the searching mode. The searching may last for 1/2 minute. If no phone can be found, the hands free will return to idle mode.)
OR
To connect with the hands free through the phone, in the setting menu of the phone, select ‘HF009’ from ‘Paired Device’. Select ‘connect’ and the phone will connect to the hands free.
Hands free Functions
| When hands free is ringing, the LCD displays the calling | |
Receive call | number. Press Multifunction Key once to receive the call and | |
| ‘Active Call’ will be displayed. | |
| When hands free is ringing, the LCD displays the calling | |
Reject call | number. Press Multifunction Key twice to reject the call and | |
| ‘BLUETOOTH’ will be displayed. | |
End call | During a call, press Multifunction Key once. LCD displays | |
‘BLUETOOTH’. | ||
| ||
| When a second call dials in during the call, the LCD displays | |
Switch to/from waiting | the second calling number. | |
1. The incoming call will be rejected if no action is taken after 8 | ||
call(call waiting) | ||
seconds. | ||
| ||
| 2. You can also reject the incoming call by double clicking the | |
| 8 |
www.wagan.com