Wagan 2444 user manual In- Car Use, Office or Home Use, Care and Maintenance

Page 5

USER’S MANUAL — Please read before using this equipment.

 

Multifunction Key.

 

3. To receive the incoming call and end the active call, click the

 

Multifunction Key once.

 

4. To switch to the incoming call, press & hold the

 

Multifunction Key for 2 seconds. The LCD screen will display

 

'Call Hold'.

 

5. To switch back to the call on hold, press & hold the

 

Multifunction Key for 2 seconds again.

Transfer call from hands

During a call, press & hold Multifunction Key for 5 seconds.

LCD displays ‘BLUETOOTH’. To transfer back to the device,

free to the phone

press and hold once again.

 

Redial the last number

In standby mode, press Multifunction Key twice. The last

number will be redialed. LCD displays ‘Dialing’.

 

 

In standby mode, press Multifunction Key once. The LCD will

 

display ‘Voice Call.’ You will hear a tone from the hands free.

Voice dial

It indicates the mobile phone is ready to receive voice tag.

Speak the name of the person you wish to call. Then the mobile

 

starts the voice dial automatically.

 

(Ensure the mobile phone supports Voice Control Dialing

 

before use.)

 

To temporarily mute the microphone, click together the volume

Mute microphone

‘^’ or ‘v’ buttons once. You will hear a ‘do’ sound. This will

allow you to hear the other side but the other side does not hear

 

 

you. Press ‘^’ or ‘v’ again to un-mute.

Adjust volume

Press ‘^’ or ‘v’ buttons to control volume up or down. LCD

displays the volume level.

 

 

Connect external headphone to the hands free device. This will

Privacy call

allow you to hear the other side but the other people inside the

 

car will not be able to hear.

 

In standby mode, press & hold the ‘^’ for 2 seconds. This

Disconnect with mobile

function is for connecting the hands free to another mobile.

LCD displays ‘BLUETOOTH’. To reconnect to the phone,

 

 

click the Multifunction Key once

*The Functions ‘Caller ID display’, ‘Redial the last number,’ ‘Call waiting’ and ‘Call transfer’ are supported by Hands free Profile instead of Headset Profile. For using those functions, please check if the mobile phone supports Hands free Profile.

*The Function ‘Volume Level Display’ is available if the phone supports ‘Remote Volume Control.’

9© 2007 Wagan Corporation. All Rights Reserved.

Wagan and Wagan.com are trademarks used by Wagan Corporation.

Bluetooth Wireless Handsfree Car Kit

By Wagan Tech

In- Car Use

1. Inside the car, clip the provided bracket to the sun visor as shown.

2. Fit the hands free on the bracket.

3. To flip the hands free up or down, slack the screw of the bracket gently.

4. After the hands free has adjusted to a comfortable view angle facing you, lock the screw.

5. Slide out microphone to switch on. For the best performance, extend the microphone fully.

Office or Home Use

1. Put the hands free on the desktop.

2. Put it on a flat surface.

3. Slide out microphone to switch on. For the best performance,

extend the microphone fully.

Care and Maintenance

Check the laws and regulations on the use of mobile phones and hands free equipment in the area where you drive.

10

www.wagan.com

Image 5
Contents Product Description Bluetooth Wireless Handsfree Car KitQuick User Guide BluetoothSwitch on hands free Switch On / OffSwitch off hands free Getting Started‘BLUETOOTH’ Pairing with a phoneConnect / Reconnect to your phone To connect with phoneOffice or Home Use Care and MaintenanceIn- Car Use Wagan Corp. Limited Warranty Registration Form Specification