Section |
|
|
|
| |
03 | Operating this unit |
|
| ||
|
|
|
|
|
|
| Initial Settings | Switching the auxiliary 1 setting | |||
| Adjusting initial settings | % Touch AUX1 on the initial menu to se- | |||
| lect desired setting. | ||||
| Using the initial settings, you can customize | ||||
| ! VIDEO – an iPod with video capabilities | ||||
| various system settings to achieve optimal per- | ||||
| connected with | ||||
| formance from this unit. | ||||
| |||||
|
|
|
| ||
|
|
|
| ! AUDIO – auxiliary device connected with a | |
|
|
|
| stereo mini plug cable | |
|
|
|
| ! OFF – No auxiliary device is connected | |
|
|
|
| Switching the auxiliary 2 setting | |
|
|
|
| % Touch AUX2 on the initial menu to turn | |
|
|
|
| ||
|
|
|
| auxiliary 2 setting on. | |
|
|
|
| # To turn auxiliary 2 setting off, touch AUX2 | |
1 | Function display | again. | |||
|
|
Shows the function names.
1Touch the source icon and then touch OFF to turn this unit off.
2Touch the screen to display the touch panel keys.
3Touch AV MENU and then touch INITIAL MENU to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function names, touch PREV.
4Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch BACK.
Setting the rear output and subwoofer controller
This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (FULL) or subwoofer (S.W) con- nection. If you switch the rear output setting to S.W, you can connect a rear speaker lead directly to a subwoofer without using an auxili- ary amp.
Initially, the unit is set for rear
!When the
1 Touch REAR SP on the initial menu.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 49.
2 Touch c or d next to REAR SP to switch the rear output setting.
Touch c to select
#When no subwoofer is connected to the rear output, select FULL
42 En