Section |
|
|
|
|
04 |
| Available accessories |
|
|
|
|
|
|
|
| 2 Touch BSSM on the function menu to | Digital Signal Processor | ||
| turn BSSM on. | Introduction of DSP adjustments | ||
| BSSM begins to flash. While BSSM is flashing | |||
| the 12 strongest broadcast stations will be | You can use this unit to control | ||
| stored in order from the lowest channel up. | processor | ||
| When finished, BSSM stops flashing. | rately. | ||
| # To cancel the storage process, touch BSSM | ! Some functions may differ depending on the | ||
| again. | |||
| 3 Touch ESC to return to the TV picture. | unit. | ||
|
|
| ||
| # To return to the previous display, touch BACK. | Important | ||
|
|
| ||
|
| Note | When a | |
| Storing broadcast stations with BSSM may re- | DVD player are connected to this unit, be sure to | ||
| use an optical cable (e.g. | |||
| place broadcast stations you have saved using | |||
|
|
| ||
| P01 to P12. |
|
|
1 DSP display
Shows the DSP function names.
By carrying out the following settings/adjust- ments in the order shown, you can create a fi-
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a test tone
6 Selecting a
7 Adjusting the speaker output levels
8 Adjusting
1 Touch AV MENU and then touch DSP MENU to display the DSP function names.
The DSP function names are displayed and operable ones are highlighted.
74 En