En_CB2455.book Page 3 Wednesday, June 8, 2005 9:32 AM
| Using Your Headset | |
|
| |
Usage | Action | |
Turning on | Press and hold the | |
headset | blue. | |
Turning off | Press and hold the | |
headset | ||
| ||
Making a call | Make sure that your headset is turned on (it may be in standby mode when | |
inactive), dial the number, and then proceed with your call. | ||
| ||
Answering a call | If there is an incoming call, your earpiece and mobile phone rings, and your | |
headset beeps. Press the | ||
| ||
Ending a call | Press the | |
your mobile phone. | ||
| ||
Using Voice Dial* | Press the | |
tag. | ||
Using Last | Press the | |
Number Redial* | ||
| ||
Adjusting volume | Press the Volume Increase or Volume Decrease button to gradually | |
increase or decrease the volume. | ||
Rejecting a call | Press and hold the | |
Putting a call on | Press and hold the Volume Increase and Volume Decrease buttons | |
hold | simultaneously, for one second. | |
Switching between | Press the Volume Increase and Volume Decrease buttons | |
calls | simultaneously. | |
Muting or | Press and hold one of the Volume buttons until the LED alternately blinks | |
unmuting the | red and blue. | |
microphone | To unmute the microphone, press one of the Volume buttons. | |
| Make sure that your headset is turned off. Press and hold both Volume | |
Clearing all | buttons simultaneously for 20 seconds. The LED alternately blinks red and | |
blue. Press and hold both Volume buttons for two seconds. You hear two | ||
headset pairings | ||
beeps and your headset turns itself off automatically. Charge your headset for | ||
| ||
| a few seconds to reset your headset. All current pairings are cleared. |
*Some features are available only for certain mobile phones. Refer to your mobile phone’s documentation.
3