Nortel Networks M7324 manual Making and answering calls

Making and answering calls

Answering calls	Answering calls using the handset
	When your telephone rings, or ¼flashes beside an Intercom or line button:
	1. Lift the handset.
	OR
	Press the button beside the flashing ¼before lifting the handset.
	Answering calls using Handsfree
	When your telephone rings, or ¼flashes beside an Intercom or line button:
	1. Press ©.
Making calls	Depending upon the dialing mode programmed on your telephone, you may
	have to lift the handset before making a call.

ÂExternal calls using numbered line buttons

1.If you do not have an external Prime line, press a line button.

2.Dial your call.

ÆExternal calls using Intercom buttons

1.Lift the handset.

2.If ¼appears beside an Intercom button, enter a line pool access code.

OR

Press an Intercom button without ¼, then enter a line pool access code.

3.When you hear external dial tone, dial your call.

Internal calls using Intercom buttons

1.If you do not have an internal Prime line, press Æ.

2.Dial your call.

Note: Line pool access codes and extension numbers are supplied by your

System Administrator.

Making calls using Handsfree

1.Press ©instead of lifting the handset.

úHolding Calls

1.Press ú. The ¼flashes beside the line on hold.

2.Press the line button with the flashing ¼to return to the call. Automatic hold

Calls are put on hold automatically when you switch from one line to another. Exclusive hold

Use Exclusive Hold (Äú) to keep a call on hold so that it can be retrieved only at your telephone.

©This button operates your telephone’s built-in microphone and speaker. Your System Administrator can program Handsfree for your telephone. Switching between Handsfree and handset

1.Press ©and replace the handset to switch to Handsfree.

2.Pick up the handset to switch back.

Using Mute

1.Press ©to turn the microphone OFF.

2.Press ©again to turn the microphone ON.

Page 4