Nortel Networks Portable Telephone manual Making a call, Answering a call, Releasing a call

Page 6

Making a call

Following a successful login,

1Use the dial pad to enter the digits.

The digits are displayed on the handset as they are entered.

2Press the SND key.

Note: Alternatively, you may use the NAME key to display a list of numbers that have been provisioned on your system, or use the RCL key to display a list of Speed dial numbers or recently dialed numbers. See the NetVision Phone Quick Reference Guide for details on the operation of these features.

Answering a call

Press the SND key while the handset is ringing.

Note: Alternatively, the handset may be configured to answer on any key press or to auto-answer. See the NetVision Phone Quick Reference Guide for details on the operation of these features.

Releasing a call

While on an active call, press the END key.

The handset display will change from Active to Ready.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 212122-A Copyright 2002 Nortel Networks Symbol NetVision Telephone feature overview Powering up the handset OverviewLogging out LogoutLogging Making a call Answering a callReleasing a call Transfer TransferConference ConferenceMake Set Busy SetBusyCall Forward CallFwdCall Fwd Retrieve a parked call Call ParkCallPark CPRetrieveRing Again RingAgainSystem Speed Call SpeedCallOverhead Paging Group CallGroupCall PagingCall Pickup CallPickupPrivOvride Retrieve voice mail messages Shortcut method
Top Page Image Contents