C4 030 H and se t | Stan d ard 1 . 00 |
|
|
To install or remove batteries:
1.Press the top of the battery compart- ment lid and slide it down.
2.Insert new batteries according to the marking in the battery compart- ment. Ensure correct polarity for each
battery.
3.Slide the lid back in place.
Battery charging
To extend the service life of the batteries:
•Charge batteries at least 15 hours before initial use of handset. To attain maximum power output, complete three to five charge and discharge cycles are required.
•Charge regularly.
•Avoid extreme temperatures as they affect the charging capability.
To charge batteries: | Place the handset on the charging | |
|
| unit. |
Charge Display |
|
|
The battery icon | , which is located at top left of the display, indicates bat- | |
tery charging status. Each bar of the battery icon represents about 1/3 of
maximum charging capacity. When the handset is placed in the charger, flash- ing segments indicate that charging is taking place.
• The charging status indicator is only relevant after the first charging cycle has completed.
• Switching the handset Off and On, or replacing the batteries results in loss of the battery capacity status. The charging status indicator is only relevant after the next charging cycle has completed.
• After a complete discharge of the batteries, the charging status symbol appears after a few minutes of charging.
Charge Warning
If the telephone beeps and the empty battery icon displays, batteries require charging. During a call, the handset switches off after a few minutes.
8