Attaching the Base Stand
The base stand can be attached to the SoundPoint® IP 430 in one of two ways:
Deskmount Method:
1 Connect all cables. | 2 | Align tabs of base | 3 | Snap firmly |
|
| stand as shown. |
| into place. |
Wallmount Method:
1 On the back of the phone, remove the key located behind the hookswitch. Reposition it so that the end tab (at 45º angle) is facing up. This will ensure that the handset remains in place within the cradle in a wallmount position.
2With mounting tab of the base
unit facing up, fasten the base stand to wall using wall anchors (not included). When base stand is secured to wall and all cables are connected, snap the SoundPoint® IP 430 into place.
SoundPoint® IP 430 Startup
As soon as power is supplied, the SoundPoint® IP 430 starts an automated process of establishing itself on the network and downloading software and applications.
Check with your system administrator if specific configuration is required for
your application software or if any errors appear during the download process.
For further instructions on how to use your new SoundPoint® IP 430, consult the User Guide available from www. polycom.com.
SoundPoint® IP 430 Quick Start Guide