Nortel Networks LIP-6812 manual Transferring Calls, Blind/Unannounced, Call Forward

LIP-6812 User Guide

To cancel the Transfer:

1)Press the [Cncl] Softkey.

2.5.Transferring Calls, Blind/Unannounced

You can transfer an active call to another extension without talking to the party who is to receive the call, using Blind Transfer. The caller is transferred to the new party without verifying that the new party is there or willing to receive the call.

To transfer an active call:

1)Press [BXfr] Softkey.

2)Dial the number you wish to receive the transfer.

3)Hang up to complete the transfer.

2.6.Call Forward

Call forward directs incoming calls to ring at another location. There are 4 conditions that can be defined to forward calls:

-Call Forward Busy – redirects incoming calls if the Line is busy.

-Call Forward No Answer – redirects incoming calls if the call is not answered in the designated time allowed (No Answer time).

-Call Forward Busy or No Answer – redirects incoming call if the Line is busy or, if idle after No Answer time expires.

-Call Forward All Calls – redirects all incoming calls to a Line you designate.

To set up Call Forward:

1)Press [CFwd] Softkey, and use the [Prev]-[Next]Softkeys to select the desired Call Forward Condition and press the [ OK ] Softkey.

2)Input the telephone number or address where your calls will be sent and press the [ OK ] Softkey.

NOTE: When Call Forward is active, “Fwd. to ……..” shows on the LCD screen.

To disable Call Forward:

1) Press [CFwd] Softkey, the message “Fwd. to “ is shown on the LCD screen.

7 June 07