Nortel Networks LIP-6812 Making a Call, Putting a Call on Hold, Transferring Calls, Announced

LIP-6812 User Guide

NOTE: Calls can not be received unless the Line is registered to a Call Server. When not registered, the Line button LED will blink red and orange.

2.2. Making a Call

You can make a call using on-hook or off-hook dialing.

To place a call:

1)Lift the handset, press , press , or press Line button.

2)Dial the destination phone number; you may need to dial ‘#’ at the end of the number.

3)When the called party answers, begin speaking (the LCD will display the elapsed call time).

To end the call,

1)Replace the handset, press , press , press [EndC] Softkey, or press Line button.

2.3.Putting a Call on Hold

You can place a call in a waiting state; the held party cannot hear you and you cannot hear the held party. You can answer or place other calls while a call is on hold.

To place a call on Hold:

1) Press the [Hold] Softkey.

To retrieve a held call:

1) Press the blinking Line button, or press [Rsum] Softkey.

NOTE: If multiple calls are on hold, a list of available calls will display. Use the [Prev]-[Next]Softkeys to select the desired call, “Retrieve Call Idx. #”, and press the [ OK ] Softkey.

If you place a call on hold and return to idle, you may receive a Call Hold Ringback tone.

2.4. Transferring Calls, Announced

You can send an active call to another extension and either announce the call transfer or hang- up to complete the transfer.

To transfer an active call:

1)Press the [Trns] Softkey.

2)Dial the number you wish to receive the transfer.

3)You may await answer and then hang-up, or just hang-up to complete the transfer.

6 June 07