Configuring the MC 3100 Web UI
Setting up a route schedule
You can optionally set up a route schedule so that at specific times you receive calls on a specific phone or device.
When call routing is selected, time periods that are not configured in the route schedule automatically receive Do Not Disturb mode. When in Do Not Disturb mode, you cannot place outgoing calls from the MC 3100 Web UI without reconfiguring Advanced Call Routing.
Setting up a route schedule
1.From the Settings page, click Use Advanced call routing.
2.Click the Add a route schedule link. The Add new routing rule pane appears.
3.Create a rule.
a.Select one of the preconfigured devices from the Send calls to list.
b.Enter the time in the From and To boxes. Use
Examples: 23:59, 2359, 11:59pm, 1159pm
c.Place a check mark beside the days that this rule should be active.
4.Click Save.
You can create more than one schedule. For example, you might want one schedule for your normal working hours, and a second schedule for regular meetings or appointments.
If you create more than one schedule, the schedule may overlap with another schedule. Sort your schedules in priority order, so that the more important schedule is higher in the list.
16 | November 2009 | |
|
|
|